Design7 min read
Designing exteriors for the Bangalore monsoon
Overhangs, drip edges, drainage and the handful of details that separate facades that age well from those that don't.
Bangalore gets around 900 mm of rain a year, much of it in short, intense bursts. That pattern — heavy rain followed by strong sun — is harder on a facade than steady drizzle. These are the details we never skip.
Give water somewhere to go
Every horizontal surface needs a fall, and every edge needs a drip groove. Parapets get a coping with an overhang, window sills slope outwards, and balconies drain to a spout rather than over the edge. Simple, and often missed.
Overhangs are not optional
A 600 mm overhang keeps the top third of a wall dry in most rain. On west and south faces we go deeper, or add a screen. Terracotta jaali and timber slat screens shade the wall, cut heat gain and let the surface dry quickly between showers.
Pick materials that dry
Dense wire-cut brick, granite, laterite and treated hardwood all handle the wet-dry cycle well. Cement-rich render cracks; we prefer lime-based plasters that move with the building. Timber must be off the ground and end-sealed.
Plan the landscape as drainage
Garden levels should fall away from the house, paving should be permeable where possible, and a recharge pit turns a problem into stored groundwater. The Terracotta House project is a good example of this done on a tight urban plot.
Written by the team at Brick & Timber Studio. Questions about anything here? Message us on WhatsApp.
